linux_kernel/drivers/counter/stm32-lptimer-cnt.c
Alexandru Ardelean d3be83244c iio: remove explicit IIO device parent assignment
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
   I = devm_iio_device_alloc(P, SP);
   ...
-  I->dev.parent = P;

It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'

But this is is only done in case where the block is left empty.

The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.

However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14 11:49:59 +01:00

753 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* STM32 Low-Power Timer Encoder and Counter driver
*
* Copyright (C) STMicroelectronics 2017
*
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>
*
* Inspired by 104-quad-8 and stm32-timer-trigger drivers.
*
*/
#include <linux/bitfield.h>
#include <linux/counter.h>
#include <linux/iio/iio.h>
#include <linux/mfd/stm32-lptimer.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
struct stm32_lptim_cnt {
struct counter_device counter;
struct device *dev;
struct regmap *regmap;
struct clk *clk;
u32 ceiling;
u32 polarity;
u32 quadrature_mode;
bool enabled;
};
static int stm32_lptim_is_enabled(struct stm32_lptim_cnt *priv)
{
u32 val;
int ret;
ret = regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
if (ret)
return ret;
return FIELD_GET(STM32_LPTIM_ENABLE, val);
}
static int stm32_lptim_set_enable_state(struct stm32_lptim_cnt *priv,
int enable)
{
int ret;
u32 val;
val = FIELD_PREP(STM32_LPTIM_ENABLE, enable);
ret = regmap_write(priv->regmap, STM32_LPTIM_CR, val);
if (ret)
return ret;
if (!enable) {
clk_disable(priv->clk);
priv->enabled = false;
return 0;
}
/* LP timer must be enabled before writing CMP & ARR */
ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, priv->ceiling);
if (ret)
return ret;
ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, 0);
if (ret)
return ret;
/* ensure CMP & ARR registers are properly written */
ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
(val & STM32_LPTIM_CMPOK_ARROK),
100, 1000);
if (ret)
return ret;
ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
STM32_LPTIM_CMPOKCF_ARROKCF);
if (ret)
return ret;
ret = clk_enable(priv->clk);
if (ret) {
regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
return ret;
}
priv->enabled = true;
/* Start LP timer in continuous mode */
return regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
STM32_LPTIM_CNTSTRT, STM32_LPTIM_CNTSTRT);
}
static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
{
u32 mask = STM32_LPTIM_ENC | STM32_LPTIM_COUNTMODE |
STM32_LPTIM_CKPOL | STM32_LPTIM_PRESC;
u32 val;
/* Setup LP timer encoder/counter and polarity, without prescaler */
if (priv->quadrature_mode)
val = enable ? STM32_LPTIM_ENC : 0;
else
val = enable ? STM32_LPTIM_COUNTMODE : 0;
val |= FIELD_PREP(STM32_LPTIM_CKPOL, enable ? priv->polarity : 0);
return regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask, val);
}
static int stm32_lptim_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_ENABLE:
if (val < 0 || val > 1)
return -EINVAL;
/* Check nobody uses the timer, or already disabled/enabled */
ret = stm32_lptim_is_enabled(priv);
if ((ret < 0) || (!ret && !val))
return ret;
if (val && ret)
return -EBUSY;
ret = stm32_lptim_setup(priv, val);
if (ret)
return ret;
return stm32_lptim_set_enable_state(priv, val);
default:
return -EINVAL;
}
}
static int stm32_lptim_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
u32 dat;
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = regmap_read(priv->regmap, STM32_LPTIM_CNT, &dat);
if (ret)
return ret;
*val = dat;
return IIO_VAL_INT;
case IIO_CHAN_INFO_ENABLE:
ret = stm32_lptim_is_enabled(priv);
if (ret < 0)
return ret;
*val = ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/* Non-quadrature mode: scale = 1 */
*val = 1;
*val2 = 0;
if (priv->quadrature_mode) {
/*
* Quadrature encoder mode:
* - both edges, quarter cycle, scale is 0.25
* - either rising/falling edge scale is 0.5
*/
if (priv->polarity > 1)
*val2 = 2;
else
*val2 = 1;
}
return IIO_VAL_FRACTIONAL_LOG2;
default:
return -EINVAL;
}
}
static const struct iio_info stm32_lptim_cnt_iio_info = {
.read_raw = stm32_lptim_read_raw,
.write_raw = stm32_lptim_write_raw,
};
static const char *const stm32_lptim_quadrature_modes[] = {
"non-quadrature",
"quadrature",
};
static int stm32_lptim_get_quadrature_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
return priv->quadrature_mode;
}
static int stm32_lptim_set_quadrature_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int type)
{
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
if (stm32_lptim_is_enabled(priv))
return -EBUSY;
priv->quadrature_mode = type;
return 0;
}
static const struct iio_enum stm32_lptim_quadrature_mode_en = {
.items = stm32_lptim_quadrature_modes,
.num_items = ARRAY_SIZE(stm32_lptim_quadrature_modes),
.get = stm32_lptim_get_quadrature_mode,
.set = stm32_lptim_set_quadrature_mode,
};
static const char * const stm32_lptim_cnt_polarity[] = {
"rising-edge", "falling-edge", "both-edges",
};
static int stm32_lptim_cnt_get_polarity(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
return priv->polarity;
}
static int stm32_lptim_cnt_set_polarity(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int type)
{
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
if (stm32_lptim_is_enabled(priv))
return -EBUSY;
priv->polarity = type;
return 0;
}
static const struct iio_enum stm32_lptim_cnt_polarity_en = {
.items = stm32_lptim_cnt_polarity,
.num_items = ARRAY_SIZE(stm32_lptim_cnt_polarity),
.get = stm32_lptim_cnt_get_polarity,
.set = stm32_lptim_cnt_set_polarity,
};
static ssize_t stm32_lptim_cnt_get_ceiling(struct stm32_lptim_cnt *priv,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "%u\n", priv->ceiling);
}
static ssize_t stm32_lptim_cnt_set_ceiling(struct stm32_lptim_cnt *priv,
const char *buf, size_t len)
{
int ret;
if (stm32_lptim_is_enabled(priv))
return -EBUSY;
ret = kstrtouint(buf, 0, &priv->ceiling);
if (ret)
return ret;
if (priv->ceiling > STM32_LPTIM_MAX_ARR)
return -EINVAL;
return len;
}
static ssize_t stm32_lptim_cnt_get_preset_iio(struct iio_dev *indio_dev,
uintptr_t private,
const struct iio_chan_spec *chan,
char *buf)
{
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
return stm32_lptim_cnt_get_ceiling(priv, buf);
}
static ssize_t stm32_lptim_cnt_set_preset_iio(struct iio_dev *indio_dev,
uintptr_t private,
const struct iio_chan_spec *chan,
const char *buf, size_t len)
{
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
return stm32_lptim_cnt_set_ceiling(priv, buf, len);
}
/* LP timer with encoder */
static const struct iio_chan_spec_ext_info stm32_lptim_enc_ext_info[] = {
{
.name = "preset",
.shared = IIO_SEPARATE,
.read = stm32_lptim_cnt_get_preset_iio,
.write = stm32_lptim_cnt_set_preset_iio,
},
IIO_ENUM("polarity", IIO_SEPARATE, &stm32_lptim_cnt_polarity_en),
IIO_ENUM_AVAILABLE("polarity", &stm32_lptim_cnt_polarity_en),
IIO_ENUM("quadrature_mode", IIO_SEPARATE,
&stm32_lptim_quadrature_mode_en),
IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_lptim_quadrature_mode_en),
{}
};
static const struct iio_chan_spec stm32_lptim_enc_channels = {
.type = IIO_COUNT,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_ENABLE) |
BIT(IIO_CHAN_INFO_SCALE),
.ext_info = stm32_lptim_enc_ext_info,
.indexed = 1,
};
/* LP timer without encoder (counter only) */
static const struct iio_chan_spec_ext_info stm32_lptim_cnt_ext_info[] = {
{
.name = "preset",
.shared = IIO_SEPARATE,
.read = stm32_lptim_cnt_get_preset_iio,
.write = stm32_lptim_cnt_set_preset_iio,
},
IIO_ENUM("polarity", IIO_SEPARATE, &stm32_lptim_cnt_polarity_en),
IIO_ENUM_AVAILABLE("polarity", &stm32_lptim_cnt_polarity_en),
{}
};
static const struct iio_chan_spec stm32_lptim_cnt_channels = {
.type = IIO_COUNT,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_ENABLE) |
BIT(IIO_CHAN_INFO_SCALE),
.ext_info = stm32_lptim_cnt_ext_info,
.indexed = 1,
};
/**
* enum stm32_lptim_cnt_function - enumerates LPTimer counter & encoder modes
* @STM32_LPTIM_COUNTER_INCREASE: up count on IN1 rising, falling or both edges
* @STM32_LPTIM_ENCODER_BOTH_EDGE: count on both edges (IN1 & IN2 quadrature)
*/
enum stm32_lptim_cnt_function {
STM32_LPTIM_COUNTER_INCREASE,
STM32_LPTIM_ENCODER_BOTH_EDGE,
};
static enum counter_count_function stm32_lptim_cnt_functions[] = {
[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
};
enum stm32_lptim_synapse_action {
STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE,
STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE,
STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES,
STM32_LPTIM_SYNAPSE_ACTION_NONE,
};
static enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
/* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */
[STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
[STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
[STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
[STM32_LPTIM_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
};
static int stm32_lptim_cnt_read(struct counter_device *counter,
struct counter_count *count, unsigned long *val)
{
struct stm32_lptim_cnt *const priv = counter->priv;
u32 cnt;
int ret;
ret = regmap_read(priv->regmap, STM32_LPTIM_CNT, &cnt);
if (ret)
return ret;
*val = cnt;
return 0;
}
static int stm32_lptim_cnt_function_get(struct counter_device *counter,
struct counter_count *count,
size_t *function)
{
struct stm32_lptim_cnt *const priv = counter->priv;
if (!priv->quadrature_mode) {
*function = STM32_LPTIM_COUNTER_INCREASE;
return 0;
}
if (priv->polarity == STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES) {
*function = STM32_LPTIM_ENCODER_BOTH_EDGE;
return 0;
}
return -EINVAL;
}
static int stm32_lptim_cnt_function_set(struct counter_device *counter,
struct counter_count *count,
size_t function)
{
struct stm32_lptim_cnt *const priv = counter->priv;
if (stm32_lptim_is_enabled(priv))
return -EBUSY;
switch (function) {
case STM32_LPTIM_COUNTER_INCREASE:
priv->quadrature_mode = 0;
return 0;
case STM32_LPTIM_ENCODER_BOTH_EDGE:
priv->quadrature_mode = 1;
priv->polarity = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES;
return 0;
}
return -EINVAL;
}
static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
struct counter_count *count,
void *private, char *buf)
{
struct stm32_lptim_cnt *const priv = counter->priv;
int ret;
ret = stm32_lptim_is_enabled(priv);
if (ret < 0)
return ret;
return scnprintf(buf, PAGE_SIZE, "%u\n", ret);
}
static ssize_t stm32_lptim_cnt_enable_write(struct counter_device *counter,
struct counter_count *count,
void *private,
const char *buf, size_t len)
{
struct stm32_lptim_cnt *const priv = counter->priv;
bool enable;
int ret;
ret = kstrtobool(buf, &enable);
if (ret)
return ret;
/* Check nobody uses the timer, or already disabled/enabled */
ret = stm32_lptim_is_enabled(priv);
if ((ret < 0) || (!ret && !enable))
return ret;
if (enable && ret)
return -EBUSY;
ret = stm32_lptim_setup(priv, enable);
if (ret)
return ret;
ret = stm32_lptim_set_enable_state(priv, enable);
if (ret)
return ret;
return len;
}
static ssize_t stm32_lptim_cnt_ceiling_read(struct counter_device *counter,
struct counter_count *count,
void *private, char *buf)
{
struct stm32_lptim_cnt *const priv = counter->priv;
return stm32_lptim_cnt_get_ceiling(priv, buf);
}
static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
struct counter_count *count,
void *private,
const char *buf, size_t len)
{
struct stm32_lptim_cnt *const priv = counter->priv;
return stm32_lptim_cnt_set_ceiling(priv, buf, len);
}
static const struct counter_count_ext stm32_lptim_cnt_ext[] = {
{
.name = "enable",
.read = stm32_lptim_cnt_enable_read,
.write = stm32_lptim_cnt_enable_write
},
{
.name = "ceiling",
.read = stm32_lptim_cnt_ceiling_read,
.write = stm32_lptim_cnt_ceiling_write
},
};
static int stm32_lptim_cnt_action_get(struct counter_device *counter,
struct counter_count *count,
struct counter_synapse *synapse,
size_t *action)
{
struct stm32_lptim_cnt *const priv = counter->priv;
size_t function;
int err;
err = stm32_lptim_cnt_function_get(counter, count, &function);
if (err)
return err;
switch (function) {
case STM32_LPTIM_COUNTER_INCREASE:
/* LP Timer acts as up-counter on input 1 */
if (synapse->signal->id == count->synapses[0].signal->id)
*action = priv->polarity;
else
*action = STM32_LPTIM_SYNAPSE_ACTION_NONE;
return 0;
case STM32_LPTIM_ENCODER_BOTH_EDGE:
*action = priv->polarity;
return 0;
}
return -EINVAL;
}
static int stm32_lptim_cnt_action_set(struct counter_device *counter,
struct counter_count *count,
struct counter_synapse *synapse,
size_t action)
{
struct stm32_lptim_cnt *const priv = counter->priv;
size_t function;
int err;
if (stm32_lptim_is_enabled(priv))
return -EBUSY;
err = stm32_lptim_cnt_function_get(counter, count, &function);
if (err)
return err;
/* only set polarity when in counter mode (on input 1) */
if (function == STM32_LPTIM_COUNTER_INCREASE
&& synapse->signal->id == count->synapses[0].signal->id) {
switch (action) {
case STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE:
case STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE:
case STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES:
priv->polarity = action;
return 0;
}
}
return -EINVAL;
}
static const struct counter_ops stm32_lptim_cnt_ops = {
.count_read = stm32_lptim_cnt_read,
.function_get = stm32_lptim_cnt_function_get,
.function_set = stm32_lptim_cnt_function_set,
.action_get = stm32_lptim_cnt_action_get,
.action_set = stm32_lptim_cnt_action_set,
};
static struct counter_signal stm32_lptim_cnt_signals[] = {
{
.id = 0,
.name = "Channel 1 Quadrature A"
},
{
.id = 1,
.name = "Channel 1 Quadrature B"
}
};
static struct counter_synapse stm32_lptim_cnt_synapses[] = {
{
.actions_list = stm32_lptim_cnt_synapse_actions,
.num_actions = ARRAY_SIZE(stm32_lptim_cnt_synapse_actions),
.signal = &stm32_lptim_cnt_signals[0]
},
{
.actions_list = stm32_lptim_cnt_synapse_actions,
.num_actions = ARRAY_SIZE(stm32_lptim_cnt_synapse_actions),
.signal = &stm32_lptim_cnt_signals[1]
}
};
/* LP timer with encoder */
static struct counter_count stm32_lptim_enc_counts = {
.id = 0,
.name = "LPTimer Count",
.functions_list = stm32_lptim_cnt_functions,
.num_functions = ARRAY_SIZE(stm32_lptim_cnt_functions),
.synapses = stm32_lptim_cnt_synapses,
.num_synapses = ARRAY_SIZE(stm32_lptim_cnt_synapses),
.ext = stm32_lptim_cnt_ext,
.num_ext = ARRAY_SIZE(stm32_lptim_cnt_ext)
};
/* LP timer without encoder (counter only) */
static struct counter_count stm32_lptim_in1_counts = {
.id = 0,
.name = "LPTimer Count",
.functions_list = stm32_lptim_cnt_functions,
.num_functions = 1,
.synapses = stm32_lptim_cnt_synapses,
.num_synapses = 1,
.ext = stm32_lptim_cnt_ext,
.num_ext = ARRAY_SIZE(stm32_lptim_cnt_ext)
};
static int stm32_lptim_cnt_probe(struct platform_device *pdev)
{
struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
struct stm32_lptim_cnt *priv;
struct iio_dev *indio_dev;
int ret;
if (IS_ERR_OR_NULL(ddata))
return -EINVAL;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
if (!indio_dev)
return -ENOMEM;
priv = iio_priv(indio_dev);
priv->dev = &pdev->dev;
priv->regmap = ddata->regmap;
priv->clk = ddata->clk;
priv->ceiling = STM32_LPTIM_MAX_ARR;
/* Initialize IIO device */
indio_dev->name = dev_name(&pdev->dev);
indio_dev->dev.of_node = pdev->dev.of_node;
indio_dev->info = &stm32_lptim_cnt_iio_info;
if (ddata->has_encoder)
indio_dev->channels = &stm32_lptim_enc_channels;
else
indio_dev->channels = &stm32_lptim_cnt_channels;
indio_dev->num_channels = 1;
/* Initialize Counter device */
priv->counter.name = dev_name(&pdev->dev);
priv->counter.parent = &pdev->dev;
priv->counter.ops = &stm32_lptim_cnt_ops;
if (ddata->has_encoder) {
priv->counter.counts = &stm32_lptim_enc_counts;
priv->counter.num_signals = ARRAY_SIZE(stm32_lptim_cnt_signals);
} else {
priv->counter.counts = &stm32_lptim_in1_counts;
priv->counter.num_signals = 1;
}
priv->counter.num_counts = 1;
priv->counter.signals = stm32_lptim_cnt_signals;
priv->counter.priv = priv;
platform_set_drvdata(pdev, priv);
ret = devm_iio_device_register(&pdev->dev, indio_dev);
if (ret)
return ret;
return devm_counter_register(&pdev->dev, &priv->counter);
}
#ifdef CONFIG_PM_SLEEP
static int stm32_lptim_cnt_suspend(struct device *dev)
{
struct stm32_lptim_cnt *priv = dev_get_drvdata(dev);
int ret;
/* Only take care of enabled counter: don't disturb other MFD child */
if (priv->enabled) {
ret = stm32_lptim_setup(priv, 0);
if (ret)
return ret;
ret = stm32_lptim_set_enable_state(priv, 0);
if (ret)
return ret;
/* Force enable state for later resume */
priv->enabled = true;
}
return pinctrl_pm_select_sleep_state(dev);
}
static int stm32_lptim_cnt_resume(struct device *dev)
{
struct stm32_lptim_cnt *priv = dev_get_drvdata(dev);
int ret;
ret = pinctrl_pm_select_default_state(dev);
if (ret)
return ret;
if (priv->enabled) {
priv->enabled = false;
ret = stm32_lptim_setup(priv, 1);
if (ret)
return ret;
ret = stm32_lptim_set_enable_state(priv, 1);
if (ret)
return ret;
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(stm32_lptim_cnt_pm_ops, stm32_lptim_cnt_suspend,
stm32_lptim_cnt_resume);
static const struct of_device_id stm32_lptim_cnt_of_match[] = {
{ .compatible = "st,stm32-lptimer-counter", },
{},
};
MODULE_DEVICE_TABLE(of, stm32_lptim_cnt_of_match);
static struct platform_driver stm32_lptim_cnt_driver = {
.probe = stm32_lptim_cnt_probe,
.driver = {
.name = "stm32-lptimer-counter",
.of_match_table = stm32_lptim_cnt_of_match,
.pm = &stm32_lptim_cnt_pm_ops,
},
};
module_platform_driver(stm32_lptim_cnt_driver);
MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
MODULE_ALIAS("platform:stm32-lptimer-counter");
MODULE_DESCRIPTION("STMicroelectronics STM32 LPTIM counter driver");
MODULE_LICENSE("GPL v2");