linux_kernel/drivers/mfd/rohm-bd718x7.c
Matti Vaittinen 8c352e68dd mfd: bd718x7: Add compatible for BD71850
ROHM BD71850 PMIC is almost identical to BD71847. Main difference is some
initial voltage values for regulators. The BD71850 can be handled by
BD71847 driver but adding own compatible makes it clearer for one who
creates the DT for board containing this PMIC and allows SW to be
differentiating PMICs if needed.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24 07:22:31 +00:00

249 lines
6.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
//
// Copyright (C) 2018 ROHM Semiconductors
//
// ROHM BD71837MWV and BD71847MWV PMIC driver
//
// Datasheet for BD71837MWV available from
// https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mfd/rohm-bd718x7.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/types.h>
static struct gpio_keys_button button = {
.code = KEY_POWER,
.gpio = -1,
.type = EV_KEY,
};
static struct gpio_keys_platform_data bd718xx_powerkey_data = {
.buttons = &button,
.nbuttons = 1,
.name = "bd718xx-pwrkey",
};
static struct mfd_cell bd71837_mfd_cells[] = {
{
.name = "gpio-keys",
.platform_data = &bd718xx_powerkey_data,
.pdata_size = sizeof(bd718xx_powerkey_data),
},
{ .name = "bd71837-clk", },
{ .name = "bd71837-pmic", },
};
static struct mfd_cell bd71847_mfd_cells[] = {
{
.name = "gpio-keys",
.platform_data = &bd718xx_powerkey_data,
.pdata_size = sizeof(bd718xx_powerkey_data),
},
{ .name = "bd71847-clk", },
{ .name = "bd71847-pmic", },
};
static const struct regmap_irq bd718xx_irqs[] = {
REGMAP_IRQ_REG(BD718XX_INT_SWRST, 0, BD718XX_INT_SWRST_MASK),
REGMAP_IRQ_REG(BD718XX_INT_PWRBTN_S, 0, BD718XX_INT_PWRBTN_S_MASK),
REGMAP_IRQ_REG(BD718XX_INT_PWRBTN_L, 0, BD718XX_INT_PWRBTN_L_MASK),
REGMAP_IRQ_REG(BD718XX_INT_PWRBTN, 0, BD718XX_INT_PWRBTN_MASK),
REGMAP_IRQ_REG(BD718XX_INT_WDOG, 0, BD718XX_INT_WDOG_MASK),
REGMAP_IRQ_REG(BD718XX_INT_ON_REQ, 0, BD718XX_INT_ON_REQ_MASK),
REGMAP_IRQ_REG(BD718XX_INT_STBY_REQ, 0, BD718XX_INT_STBY_REQ_MASK),
};
static struct regmap_irq_chip bd718xx_irq_chip = {
.name = "bd718xx-irq",
.irqs = bd718xx_irqs,
.num_irqs = ARRAY_SIZE(bd718xx_irqs),
.num_regs = 1,
.irq_reg_stride = 1,
.status_base = BD718XX_REG_IRQ,
.mask_base = BD718XX_REG_MIRQ,
.ack_base = BD718XX_REG_IRQ,
.init_ack_masked = true,
.mask_invert = false,
};
static const struct regmap_range pmic_status_range = {
.range_min = BD718XX_REG_IRQ,
.range_max = BD718XX_REG_POW_STATE,
};
static const struct regmap_access_table volatile_regs = {
.yes_ranges = &pmic_status_range,
.n_yes_ranges = 1,
};
static const struct regmap_config bd718xx_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.volatile_table = &volatile_regs,
.max_register = BD718XX_MAX_REGISTER - 1,
.cache_type = REGCACHE_RBTREE,
};
static int bd718xx_init_press_duration(struct bd718xx *bd718xx)
{
struct device* dev = bd718xx->chip.dev;
u32 short_press_ms, long_press_ms;
u32 short_press_value, long_press_value;
int ret;
ret = of_property_read_u32(dev->of_node, "rohm,short-press-ms",
&short_press_ms);
if (!ret) {
short_press_value = min(15u, (short_press_ms + 250) / 500);
ret = regmap_update_bits(bd718xx->chip.regmap,
BD718XX_REG_PWRONCONFIG0,
BD718XX_PWRBTN_PRESS_DURATION_MASK,
short_press_value);
if (ret) {
dev_err(dev, "Failed to init pwron short press\n");
return ret;
}
}
ret = of_property_read_u32(dev->of_node, "rohm,long-press-ms",
&long_press_ms);
if (!ret) {
long_press_value = min(15u, (long_press_ms + 500) / 1000);
ret = regmap_update_bits(bd718xx->chip.regmap,
BD718XX_REG_PWRONCONFIG1,
BD718XX_PWRBTN_PRESS_DURATION_MASK,
long_press_value);
if (ret) {
dev_err(dev, "Failed to init pwron long press\n");
return ret;
}
}
return 0;
}
static int bd718xx_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct bd718xx *bd718xx;
int ret;
unsigned int chip_type;
struct mfd_cell *mfd;
int cells;
if (!i2c->irq) {
dev_err(&i2c->dev, "No IRQ configured\n");
return -EINVAL;
}
bd718xx = devm_kzalloc(&i2c->dev, sizeof(struct bd718xx), GFP_KERNEL);
if (!bd718xx)
return -ENOMEM;
bd718xx->chip_irq = i2c->irq;
chip_type = (unsigned int)(uintptr_t)
of_device_get_match_data(&i2c->dev);
switch (chip_type) {
case ROHM_CHIP_TYPE_BD71837:
mfd = bd71837_mfd_cells;
cells = ARRAY_SIZE(bd71837_mfd_cells);
break;
case ROHM_CHIP_TYPE_BD71847:
mfd = bd71847_mfd_cells;
cells = ARRAY_SIZE(bd71847_mfd_cells);
break;
default:
dev_err(&i2c->dev, "Unknown device type");
return -EINVAL;
}
bd718xx->chip.dev = &i2c->dev;
dev_set_drvdata(&i2c->dev, bd718xx);
bd718xx->chip.regmap = devm_regmap_init_i2c(i2c,
&bd718xx_regmap_config);
if (IS_ERR(bd718xx->chip.regmap)) {
dev_err(&i2c->dev, "regmap initialization failed\n");
return PTR_ERR(bd718xx->chip.regmap);
}
ret = devm_regmap_add_irq_chip(&i2c->dev, bd718xx->chip.regmap,
bd718xx->chip_irq, IRQF_ONESHOT, 0,
&bd718xx_irq_chip, &bd718xx->irq_data);
if (ret) {
dev_err(&i2c->dev, "Failed to add irq_chip\n");
return ret;
}
ret = bd718xx_init_press_duration(bd718xx);
if (ret)
return ret;
ret = regmap_irq_get_virq(bd718xx->irq_data, BD718XX_INT_PWRBTN_S);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to get the IRQ\n");
return ret;
}
button.irq = ret;
ret = devm_mfd_add_devices(bd718xx->chip.dev, PLATFORM_DEVID_AUTO,
mfd, cells, NULL, 0,
regmap_irq_get_domain(bd718xx->irq_data));
if (ret)
dev_err(&i2c->dev, "Failed to create subdevices\n");
return ret;
}
static const struct of_device_id bd718xx_of_match[] = {
{
.compatible = "rohm,bd71837",
.data = (void *)ROHM_CHIP_TYPE_BD71837,
},
{
.compatible = "rohm,bd71847",
.data = (void *)ROHM_CHIP_TYPE_BD71847,
},
{
.compatible = "rohm,bd71850",
.data = (void *)ROHM_CHIP_TYPE_BD71847,
},
{ }
};
MODULE_DEVICE_TABLE(of, bd718xx_of_match);
static struct i2c_driver bd718xx_i2c_driver = {
.driver = {
.name = "rohm-bd718x7",
.of_match_table = bd718xx_of_match,
},
.probe = bd718xx_i2c_probe,
};
static int __init bd718xx_i2c_init(void)
{
return i2c_add_driver(&bd718xx_i2c_driver);
}
/* Initialise early so consumer devices can complete system boot */
subsys_initcall(bd718xx_i2c_init);
static void __exit bd718xx_i2c_exit(void)
{
i2c_del_driver(&bd718xx_i2c_driver);
}
module_exit(bd718xx_i2c_exit);
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
MODULE_DESCRIPTION("ROHM BD71837/BD71847 Power Management IC driver");
MODULE_LICENSE("GPL");